在无线局域网控制器上配置NTP

您所在的位置:网站首页 cisco 2500 series配置 在无线局域网控制器上配置NTP

在无线局域网控制器上配置NTP

2024-07-10 13:19| 来源: 网络整理| 查看: 265

 >debug ntp ?

detail Configures debug of detailed NTP messages.low Configures debug of NTP messages.packet Configures debug of NTP packets.

(at the time of writte this doc there was Cisco bug ID CSCvo29660 on which the debugs of ntpv4 are not printed in the CLI. The below debugs are using NTPv3.)(Cisco Controller) >debug ntp detail enable (Cisco Controller) >debug ntp packet enable (Cisco Controller) >*emWeb: Feb 08 11:26:53.896: ntp Auth key Info = -1

*emWeb: Feb 08 11:26:58.143: ntp Auth key Info = -1

*emWeb: Feb 08 11:26:58.143: ntp Auth key Info = -1

*emWeb: Feb 08 11:26:58.143: Key Id = 1 found at Local Index = 0

*sntpReceiveTask: Feb 08 11:26:58.143: Initiating time sequence

*sntpReceiveTask: Feb 08 11:26:58.143: Fetching time from:192.168.100.254

*sntpReceiveTask: Feb 08 11:26:58.143: Started=3758614018.143350 2019 Feb 08 11:26:58.143

*sntpReceiveTask: Feb 08 11:26:58.143: hostname=192.168.100.254 hostIdx=1 hostNum=0 *sntpReceiveTask: Feb 08 11:26:58.143: Looking for the socket addresses

*sntpReceiveTask: Feb 08 11:26:58.143: NTP Polling cycle: accepts=0, count=5, attempts=1, retriesPerHost=6. Outgoing packet on NTP Server on socket 0:

*sntpReceiveTask: Feb 08 11:26:58.143: sta=0 ver=3 mod=3 str=15 pol=8 dis=0.000000 ref=0.000000

*sntpReceiveTask: Feb 08 11:26:58.143: ori=0.000000 rec=0.000000*sntpReceiveTask: Feb 08 11:26:58.143: tra=3758614018.143422 cur=3758614018.143422

*sntpReceiveTask: Feb 08 11:26:58.143: Host Supports NTP authentication with Key Id = 1

*sntpReceiveTask: Feb 08 11:26:58.143: NTP Auth Key Id = 1 Key Length = 5

*sntpReceiveTask: Feb 08 11:26:58.143: MD5 Hash and Key Id added in NTP Tx packet

*sntpReceiveTask: Feb 08 11:26:58.143: 00000000: 1b 0f 08 00 00 00 00 00 00 00 00 00 00 00 00 00 ................*sntpReceiveTask: Feb 08 11:26:58.143: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................*sntpReceiveTask: Feb 08 11:26:58.143: 00000020: 00 00 00 00 00 00 00 00 e0 07 e6 02 24 b7 50 00 ............$.P.*sntpReceiveTask: Feb 08 11:26:58.143: 00000030: 00 00 00 01 e4 35 f3 1a 89 f0 93 c5 51 c7 c5 23 .....5......Q..#*sntpReceiveTask: Feb 08 11:26:58.143: 00000040: 01 dd 67 e0 ..g.*sntpReceiveTask: Feb 08 11:26:58.143: Flushing outstanding packets

*sntpReceiveTask: Feb 08 11:26:58.143: Flushed 0 packets totalling 0 bytes

*sntpReceiveTask: Feb 08 11:26:58.143: Packet of length 68 sent to ::ffff:192.168.100.254 UDPport=123*emWeb: Feb 08 11:26:58.143: ntp Auth key Info = 0

*emWeb: Feb 08 11:26:58.143: idx != 0 : ntp key Id = 1 Msg auth Status = 66

*sntpReceiveTask: Feb 08 11:26:58.146: Packet of length 68 received from ::ffff:192.168.100.254 UDPport=123*sntpReceiveTask: Feb 08 11:26:58.146: Incoming packet on socket 0: has Authentication Enabled*sntpReceiveTask: Feb 08 11:26:58.146: 00000000: 1c 04 08 eb 00 00 0e a0 00 00 0b 2e c3 16 11 07 ................*sntpReceiveTask: Feb 08 11:26:58.146: 00000010: e0 07 e5 f8 d3 21 bf 57 e0 07 e6 02 24 b7 50 00 .....!.W....$.P.*sntpReceiveTask: Feb 08 11:26:58.146: 00000020: e0 07 e6 02 24 e5 e3 b4 e0 07 e6 02 24 f3 c7 5a ....$.......$..Z*sntpReceiveTask: Feb 08 11:26:58.146: 00000030: 00 00 00 01 32 e4 26 47 33 16 50 bd d1 37 63 b7 ....2.&G3.P..7c.*sntpReceiveTask: Feb 08 11:26:58.146: KeyId In Recieved NTP Packet 1

*sntpReceiveTask: Feb 08 11:26:58.146: KeyId 1 found in recieved NTP packet exists as part of the trusted Key/s

*sntpReceiveTask: Feb 08 11:26:58.146: The NTP trusted Key Id 1 length = 5

*sntpReceiveTask: Feb 08 11:26:58.146: NTP Message Authentication - SUCCESS

*sntpReceiveTask: Feb 08 11:26:58.146: sta=0 ver=3 mod=4 str=4 pol=8 dis=0.043671 ref=3758614008.824734

*sntpReceiveTask: Feb 08 11:26:58.146: ori=3758614018.143422 rec=3758614018.144133*sntpReceiveTask: Feb 08 11:26:58.146: Offset=-0.000683+/-0.002787 disp=1.937698

*sntpReceiveTask: Feb 08 11:26:58.146: best=-0.000683+/-0.002787

*sntpReceiveTask: Feb 08 11:26:58.146: accepts=1 rejects=0 flushes=0

*sntpReceiveTask: Feb 08 11:26:58.146: Correction: -0.000683 +/- 0.002787 disp=1.937698

*sntpReceiveTask: Feb 08 11:26:58.146: Setting clock to 2019 Feb 08 11:26:58.145 + 0.001 +/- 1.940 secs*sntpReceiveTask: Feb 08 11:26:58.146: correction -0.001 +/- 1.938+0.003 secs - ignored

(Cisco Controller) >



【本文地址】


今日新闻


推荐新闻


CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3